Mastery of the art of the use of paper cone machine
Paper cone machine when use must master the use of certain skill, in order to ensure the normal operation of the machine and the safety in production, so what are the use of skills? Introduce below, for your reference:
1. paper cone machine equipment before use, should check each details, electrical equipment, switches are in good condition, whether the electrical circuit insulation, screw, nut fastening, protective device is safe, and in the refueling point filling grease, run idle 1-2 minutes, equipment rear can normal operation.
2. the equipment must be someone who's in charge of, it is forbidden to others casually misuse. Each part of the machine it is strictly prohibited to put in work, card, measuring tool and other sundry, operation staff shall not leave work without authorization.
3. cut low, such as using the ventilation machine, paper cutting, paper cutting height can't exceed 125mm, and according to the size requirement, pressure iron binding with positioning. Only paper cutting machine tool, can't cut the other plate, two or more persons, should cooperate with each other, work, not reached into weight and blades, to prevent a cut. Such as using a special cutter, not reaches into the spindle rotation, to prevent injury.
4. edge grinding, prevent leg into paper axis; adjust machine, pay attention to the emery cloth wheel grinding.
- Pre：Progress on the paper cone mak 2019/12/23
- Next：Paper cone machine meet the ne 2014/6/8
